Desiccant

Max Performance, Type 10BF, is the most hygroscopic absorbent deliquescent desiccant formulated by Van Air Systems for use with single and sequential tower compressed air dryers. Very low dew point requirements in compressed air dehydration can usually be met using 10BF desiccant.10BF is a hard tablet formed from hygroscopic materials that attract and hold moisture. The materials in the compound are non-toxic and are completely soluble in water.As the desiccant tablet draws water vapor out of...

Molecular Sieve 4A Desiccant in 4 x 8 mesh size is shipped in 330 pound Steel Drums. Molecular sieve is a sodium aluminosilicate. It has a fixed pore size according to the material specified, a 4 Angstrom pore size being the most common.

Activated alumina desiccant beads, 1/4" 5-10mm, are shipped in 350 pound Steel Drums. Activated alumina is a porous form of aluminum oxide. It has a high surface area which adsorbs vapors without any change in form. Activated aluminas will not soften or disintegrate easily when immersed in water.Dew points to -40°F and lower may be achieved with activated alumina depending on dryer design and operating conditions. Color and form: White beadBulk Density: 48 lbs/cu.ft.Crush strength: 50-70...

Ceramic Bead tabular desiccant is used as a prebed / support desiccant for single tower compressed air dryers. The 1/2" balls are used as a support material in air dryer desiccant beds.Our ceramic bead desiccant is fundamentally an inert material and does not have any significant active or adsorbent properties.Part Number 33-0281 (33-0114 and 33-0281 are the general IOM part numbers) is shipped in 84 lb Cartons. Absorption Resistant Shock Resistant Heat Resistant Long Life Inert Purity ...

Molecular Sieve 4A Desiccant is shipped in 330 pound Steel Drums. Molecular sieve is a sodium aluminosilicate. It has a fixed pore size according to the material specified, a 4 Angstrom pore size being the most common (1 Angstrom - 3.94 x 10-9 inches) Because of its high comparative cost, it is normally used for special process applications. Pressure dew points to -100°F may be achieved with molecular sieve depending on the dryer design and operating conditions. General Name 8x12 Beaded...

Activated alumina is a porous form of aluminum oxide. It has a high surface area which adsorbs vapors without any change in form. Activated aluminas will not soften or disintegrate easily when immersed in water.Dew points to -40°F and lower may be achieved with activated alumina depending on dryer design and operating conditions. The 1/8 (2-5mm) bead is the size most frequently used in regenerative dryers.Color and form: White beadBulk Density: 48 lbs/cu.ft.Crush strength: 17-30 lbsSurface...

Activated alumina is a porous form of aluminum oxide. It has a high surface area which adsorbs vapors without any change in form. Activated aluminas will not soften or disintegrate easily when immersed in water.Dew points to -40°F and lower may be achieved with activated alumina depending on dryer design and operating conditions. Color and form: White beadBulk Density: 48 lbs/cu.ft.Crush strength: 45-60 lbsSurface area: 1.65 x 10 6 sq ft/lbStatic adsorption | Humidity 100% RH - 40.0%90% RH -...

Activated alumina desiccant beads, 1/4" 5-10mm, are shipped in 50 pound small bags. Activated alumina is a porous form of aluminum oxide. It has a high surface area which adsorbs vapors without any change in form. Activated aluminas will not soften or disintegrate easily when immersed in water.Dew points to -40°F and lower may be achieved with activated alumina depending on dryer design and operating conditions. Color and form: White beadBulk Density: 48 lbs/cu.ft.Crush strength: 50-70...

Activated alumina is a porous form of aluminum oxide. It has a high surface area which adsorbs vapors without any change in form. Activated aluminas will not soften or disintegrate easily when immersed in water.Dew points to -40°F and lower may be achieved with activated alumina depending on dryer design and operating conditions. The 1/8 (2-5mm) bead is the size most frequently used in regenerative dryers.Color and form: White beadBulk Density: 48 lbs/cu.ft.Crush strength: 17-30 lbsSurface...

Activated alumina desiccant beads, 3/16" 4-8mm, ship in a 2,000 pound Bulk Bag (Super Sack). Activated alumina is a porous form of aluminum oxide. It has a high surface area which adsorbs vapors without any change in form. Activated aluminas will not soften or disintegrate easily when immersed in water.Dew points to -40°F and lower may be achieved with activated alumina depending on dryer design and operating conditions. Color and form: White beadBulk Density: 48 lbs/cu.ft.Crush strength:...

Activated alumina desiccant beads, 1/4" 5-10mm, are shipped in 2,000 pound Bulk Bags (Super Sacks). Activated alumina is a porous form of aluminum oxide. It has a high surface area which adsorbs vapors without any change in form. Activated aluminas will not soften or disintegrate easily when immersed in water.Dew points to -40°F and lower may be achieved with activated alumina depending on dryer design and operating conditions. Color and form: White beadBulk Density: 48 lbs/cu.ft.Crush...

Molecular Sieve 3A Desiccant is shipped in 330 pound Steel Drums. Molecular sieve is a sodium aluminosilicate. Because of its high comparative cost, it is normally used for special process applications. Pressure dew points to -100°F may be achieved with molecular sieve depending on the dryer design and operating conditions. General Name 4x8 Beaded Minimum Pore Diameter 3A Shape Sphere Size 4x8 Bulk Density 40 - 47 lbs / cu ft Resistance to Breakage 14- 20 lbs Absorption Capacity 19.5 lbs...