Item #: F101-5000
Availability: In Stock
Usually ships In 1-2 Business Days
Price: $4,832.00

    Quantity:

    The Van Air F101-5000-(*) Filter Housing can handle 5000 SCFM at 100 PSIG. During checkout, please enter the required Filtration Grade (*) in the "Special Comments" section. The filtration grades are all the same price and included in the cost of the filter housing.

    Van Air F101 Series filter housings are built to last! All F101 Series compressed air filter housings are built of welded steel and are stamped in accordance with ASME code section VIII, Div. I. with a maximum working pressure of 250 PSIG at 225° F. All F101 Series filter housings receive a rigorous hydrostatic pressure test of 1.3 times the maximum working pressure of the vessel.

    The exterior of the F101 Series filter housing is protected by a coating of primer and air-dried machine enamel. The interior of the housing is protected by alkyd enamel. Both of these coatings help protect against corrosion, chipping and cracking to increase the durability of the housing.

    The F101 Series of compressed air filter housings consists of six different housings, with flows ranging from 500 to 5000 SCFM at 100 PSIG. Custom units are available for flows up to 20,000 SCFM. The inlet and outlet connections of all the housings are NPT or ANSI RF flanges on a common centerline and include ports for pressure differential gauges.

    The filter element is accessible through a flange located at the bottom of the housing. All of the flanges up to 10" in diameter are equipped with a retaining pin on one of the bolts. This permits the flange to be rotated away from the bottom of the filter housing without completely removing it from the housing assembly. Therefore, filter elements can be replaced with relative ease.

    All of our F101 Series compressed air filter housings are equipped with a ball type manual drain valve. However, a Van Air automatic drain valve can be installed to automatically drain the filter housing when needed. This prevents the filter from flooding and which could cause damage to the filter element or contaminate the air system.


    FLOW CAPACITIES - SCFM

    Model 25
    PSIG
    50
    PSIG
    75
    PSIG
    100
    PSIG
    125
    PSIG
    150
    PSIG
    175
    PSIG
    200
    PSIG
    225
    PSIG
    250
    PSIG
    F101-500-* 175 280 390 500 610 720 825 935 1045 1155
    F101-1000-* 345 565 780 1000 1220 1435 1655 1870 2090 2310
    F101-1500-* 520 845 1175 1500 1825 2155 2480 2810 3135 3460
    F101-2000-* 690 1130 1565 2000 2435 2870 3310 3745 4180 4615
    F101-3500-* 1210 1975 2735 3500 4265 5025 5790 6550 7315 8080
    F101-5000-* 1730 2820 3910 5000 6090 7180 8270 9360 10,450 11,540


    SELECTING A FILTER

    To select the appropriate filter, determine the following conditions regarding the filter installation site:

    • Maximum flow rate
    • Min. and Max. operating pressures
    • Operating temperature
    • Pipe size
    • Degree of filtration desired
    • Contaminants to be removed

    Next, refer to the Flow Capacities chart above and locate the column with your lowest operating pressure. Then find the flow rate closest to, but greater than, that of your system. Finally, read across to the left-hand column to determine the filter model that will meet your needs.

    You will now need to refer to the Filtration Grades chart, located on the next "Tab". Determine the element grade that meets your needs. Be sure that the maximum inlet temperature listed on the chart is sufficient for your operating conditions.

    Refer to the Dimensions and Specifications chart on the last "Tab" above and locate the proper filter model number. Once you have located the model number within the chart, verfiy that the inlet and outlet connections are suitable for your piping. Also make sure that there will be adequate clearance for element replacement.

    FILTRATION GRADES

    Application Element
    Grade
    Purpose Nominal
    Particulate
    Removal
    Element
    Flow
    Direction
    End Cap
    Color Code
    Aerosol
    Removal
    (Liquids)
    AA Extra Coarse Coalescing 25.0 m IN / OUT Black
    A Coarse Coalescing 5.00 m IN / OUT Green
    B General Purpose
    Coalescing
    1.00 m IN / OUT Red
    C High Efficiency
    Coalescing
    0.01 m IN / OUT Blue
    Solid
    Particulate
    Removal
    RAA Extra Coarse Coalescing 25.0 m OUT / IN Black
    RA Coarse Coalescing 5.00 m OUT / IN Green
    RB General Purpose
    Coalescing
    1.00 m OUT / IN Red
    RC High Efficiency
    Coalescing
    0.01 m OUT / IN Blue
    HT High Temperature
    Particulate
    1.00 m OUT / IN Zinc Plate
    or
    Galvanized
    Oil Vapor
    Removal
    RD Vapor Adsorbing 0.01 m OUT / IN Black
    Maximum Working Pressure
    All Models 250 PSIG
    Operating Temperature
    Minimum 35° F
    Maximum 150° F
    Maximum Inlet Temperature
    AA, A, RAA, RA, RB, & RC Series 225° F
    B Series 175° F
    C Series 125° F
    RD Series 80° F

    DIMENSIONS AND SPECIFICATIONS

    Model  Flow1 
     (SCFM) 
     In / Out 
     Conn. 
     (Inches) 
     Drain 
     Conn. 
     (NPT) 
    A B C D E F  Flange 
     Weight 
     (lbs) 
     Weight2 
     (lbs) 
    F101-500-* 500 2 NPT 1/2" 39 6 5/8 11 11 7/8 4 5/8 24 28 113
    F101-1000-* 1000 3 NPT 1/2" 41 1/8 8 5/8 13 1/2 15 1/2 5 1/4 24 47 156
    F101-1500-* 1500 3 NPT 1/2" 44 1/2 10 3/4 16 17 3/4 6 1/4 24 69 259
    F101-2000-* 2000 4 FLG 1/2" 50 7/8 10 3/4 16 18 6 3/8 30 69 277
    F101-3500-* 3500 6 FLG 1/2" 56 5/8 12 3/4 19 24 3/4 14 1/2 30 102 410
    F101-5000-* 5000 6 FLG 1" 61 5/8 16 23 1/2 28 16 30 177 632

    * Insert appropriate filtration grades here.
    1 Flow is based on SCFM @ 100 PSIG @ 100° F.
    2 Weight includes housing and elements.
    • Due to continuous improvement, dimensions and specifications may change without notice.
    • Request certified drawing before pre-piping.

    You May Also Like

    Activated Alumina Desiccant - 1/16-inch 50 lb Bag

    Activated Alumina Desiccant - 1/16-inch 50 lb Bag

    Price: $74.00

    Spotlight!
    Activated Alumina Desiccant - 1/8-inch 50 lb Bag

    Activated Alumina Desiccant - 1/8-inch 50 lb Bag

    Price: $74.00

    Activated Alumina Desiccant 50 Pound Bag

    Activated Alumina Desiccant - 3/16-inch 50 lb Bag

    Price: $74.00

    Activated Alumina Desiccant 50 Pound Bag

    Activated Alumina Desiccant - 1/4-inch 50 lb Bag

    Price: $74.00