Van Air Systems

The Blast Pak PRO 75 Portable Compressed Air Dryer Package is the ideal solution for the mobile blasting and painting contractors. The Blast Pak PRO from Van Air Systems is a complete portable desiccant drying package engineered specifically for blasting and painting contractors. Completely assembled and welded to a forklift skid, with four lifting lugs, and built-in tie downs; the Blast Pak PRO dryers are easily lifted onto the back of a truck or trailer and moved around a job site. The Blast...

Van Air AC-60 Air-Cooled Aftercooler is an efficient and reliable air-cooled aftercooler for cooling compressed air. The major advantage of an air-cooled aftercooler is that it uses always available atmospheric air which costs nothing. Compressed air discharged from an air compressor is hot and filled with water vapor. An after-cooler reduces the amount of water in a compressed air system.Hot and moist air from the compressor is cooled quickly to a safe and usable temperature thanks to the Van...

The PDV-500T pneumatic drain valve from Van Air is a versatile draining system that is ideal for receivers, dryers, tanks, drop legs, pipes or any equpment requiring regular condensate removal. With no electricity needed for operation, it is well suited for remote or portable applications and is safe to operate in any hazardous area. Zero Air Loss As a demand operated drain, the PDV-500T automatically does the work for you. It eliminates the guess work of setting the cycle or drain open times....

Van Air Systems Molecular Sieve 4A Desiccant is shipped in 50 pound bags. Molecular sieve is a sodium aluminosilicate. It has a fixed pore size according to the material specified, a 4 Angstrom pore size being the most common. (1 Angstrom - 3.94 x 10-9 inches)Because of its high comparative cost, it is normally used for special process applications. Pressure dew points to -100°F may be achieved with molecular sieve depending on the dryer design and operating conditions.Color and Form: Off...

The Van Air HL-12 Mini Heatless Regenerative Compressed Air Dryer is compact, simple to install, and easy to maintain. This mini regenerative air dryer can handle 12 SCFM at 100 PSIG and delivers a -40°F pressure dew point to protect equipment from the damaging and expensive effects of compressed air moisture. In critical applications, MHL Series dryers can deliver a -100°F pressure dew point.Each MHL Series mini regen dryer has advanced purge savings capability to minimize the waste of...

The Van Air D-16 Freedom Single Tower Air Dryer can handle 155 SCFM @ 100 psig. Van Air is the originator of single tower dryer technology. Our single tower absorbent desiccant compressed air dryers prevent moisture in pipelines by suppressing the pressure dew point by 20° F or more from the inlet temperature. Water vapor is removed from the air as it passes through a bed of absorbent desiccant within the dryer. Our single tower absorbent desiccant dryers are adaptable to changing conditions...

The Van Air MHL-16 Mini Heatless Regenerative Compressed Air Dryer is compact, simple to install, and easy to maintain. This mini regenerative air dryer can handle 16 SCFM at 100 PSIG and delivers a -40°F pressure dew point to protect equipment from the damaging and expensive effects of compressed air moisture. In critical applications, MHL Series dryers can deliver a -100°F pressure dew point. Each MHL Series mini regen dryer has advanced purge savings capability to minimize the waste of...

Activated alumina desiccant beads, 1/4" 5-10mm, are shipped in 350 pound Steel Drums. Activated alumina is a porous form of aluminum oxide. It has a high surface area which adsorbs vapors without any change in form. Activated aluminas will not soften or disintegrate easily when immersed in water.Dew points to -40°F and lower may be achieved with activated alumina depending on dryer design and operating conditions. Color and form: White beadBulk Density: 48 lbs/cu.ft.Crush strength: 50-70...

Van Air AC-80 Air-Cooled Aftercooler is an efficient and reliable air-cooled aftercooler for cooling compressed air. The major advantage of an air-cooled aftercooler is that it uses always available atmospheric air which costs nothing. Compressed air discharged from an air compressor is hot and filled with water vapor. An after-cooler reduces the amount of water in a compressed air system.Hot and moist air from the compressor is cooled quickly to a safe and usable temperature thanks to the Van...

The Blast Pak PRO 100 Portable Compressed Air Dryer Package is the ideal solution for the mobile blasting and painting contractors. The Blast Pak PRO from Van Air Systems is a complete portable desiccant drying package engineered specifically for blasting and painting contractors. Completely assembled and welded to a forklift skid, with four lifting lugs, and built-in tie downs; the Blast Pak PRO dryers are easily lifted onto the back of a truck or trailer and moved around a job site. The...

Max Performance, Type 10BF, is the most hygroscopic absorbent deliquescent desiccant formulated by Van Air Systems for use with single and sequential tower compressed air dryers. Very low dew point requirements in compressed air dehydration can usually be met using 10BF desiccant.10BF is a hard tablet formed from hygroscopic materials that attract and hold moisture. The materials in the compound are non-toxic and are completely soluble in water.As the desiccant tablet draws water vapor out of...

The PDV-500T-7.5 pneumatic drain valve from Van Air is a versatile draining system that is ideal for receivers, dryers, tanks, drop legs, pipes or any equpment requiring regular condensate removal. With no electricity needed for operation, it is well suited for remote or portable applications and is safe to operate in any hazardous area. Zero Air Loss As a demand operated drain, the PDV-500T-7.5 automatically does the work for you. It eliminates the guess work of setting the cycle or drain...